MINI MCR-SL-I-U-4

https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 4 mA ... 20 mA, output signal: 0 A ... 10 V Your advantages  Power supply possible via the foot element (TBUS)  Low power consumption  Entry-level alternative to configurable signal conditioners  Highly-compact isolating amplifier for electrical isolation, conversion, amplification, and filtering of standard analog signals  3-way isolation  Fixed signal combinations Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356100632 Weight per Piece (excluding packing) 71.400 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 101.2 mm 12/30/2019   Page 1 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Technical data Ambient conditions Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Maximum altitude ≤ 2000 m Permissible humidity (operation) 5 % ... 95 % (non-condensing) Degree of protection IP20 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Input data Number of inputs 1 Configurable/programmable no Current input signal 4 mA ... 20 mA Max. input current 50 mA Input resistance current input approx. 50 Ω Output data Number of outputs 1 Configurable/programmable no Voltage output signal 0 V ... 10 V Max. output voltage 12.5 V Short-circuit current approx. 2 mA Load/output load voltage output ≥ 10 kΩ Ripple < 20 mVPP < 20 mVPP (at 10 kΩ) Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Max. current consumption < 9 mA Power consumption < 200 mW Connection data Connection method Screw connection Stripping length 12 mm Screw thread M3 Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 12 General No. of channels 1 Maximum transmission error ≤ 0.1 % (of final value) 12/30/2019   Page 2 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Technical data General Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) approx. 100 Hz Step response (10-90%) approx. 3.5 ms Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 30 V AC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T4 GL GL EMC 2 D Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 5% Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 5% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 5% Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Connection in acc. with standard CUL 12/30/2019   Page 3 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Technical data Standards and Regulations Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T4 GL GL EMC 2 D Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 12/30/2019   Page 4 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Block diagram 12/30/2019   Page 5 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27210100 eCl@ss 4.1 27210100 eCl@ss 5.0 27210100 eCl@ss 5.1 27210100 eCl@ss 6.0 27210100 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 4.0 EC002653 ETIM 5.0 EC002653 ETIM 6.0 EC002653 ETIM 7.0 EC002653 12/30/2019   Page 6 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Classifications UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 UNSPSC 18.0 39121008 UNSPSC 19.0 39121008 UNSPSC 20.0 39121008 UNSPSC 21.0 39121008 Approvals Approvals Approvals UL Recognized / cUL Recognized / DNV GL / cULus Recognized Ex Approvals ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 DNV GL    https://approvalfinder.dnvgl.com/  TAA000020N cULus Recognized       Accessories Accessories 12/30/2019   Page 7 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Accessories DIN rail connector DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Marking material Transparent cover - MINI MCR DKL - 2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm     Marking label - MINI MCR-DKL-LABEL - 2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL     Power module Power terminal block - MINI MCR-SL-PTB - 2864134 MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection, maximum current consumption of up to 2 A     Power terminal block - MINI MCR-SL-PTB-SP - 2864147 MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage connection, maximum current consumption of up to 2 A. Replacement part: 2902067 MINI MCR-2-PTB-PT.     Power supply 12/30/2019   Page 8 / 9 https://www.phoenixcontact.com/gb/products/2813538 Signal conditioner - MINI MCR-SL-I-U-4 - 2813538 Accessories Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653 Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the potentially explosive area     System adapter System adapter - MINI MCR-SL-V8-FLK 16-A - 2811268 Eight MINI analog signal converters with screw connection method can be connected to a control system using a system adapter and system cabling with a minimum of wiring and very low error risk.     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 12/30/2019   Page 9 / 9